Thin decorative laminate for furniture and interior surfaces
Decorative HPL
Decorative HPL is manufactured from phenolic-impregnated kraft papers and a melamine-impregnated decorative surface paper, consolidated under high pressure and temperature in accordance with EN 438. It is supplied in horizontal (HGS) and vertical (VGS) general-purpose grades and is bonded to a substrate rather than used self-supporting.
Bonded to a substrate — specify the board separately
Widest decor range in the portfolio
Four gloss bands from high gloss to matt, measured to EN 13722
Thickness tolerance ±0.1 mm at 0.5 ≤ T < 1 mm
02
Grades and classification
Grade
Standard
Environment
HGS
EN 438-3
Interior
VGS
EN 438-3
Interior
Horizontal General Purpose Standard
03
Formats
1300 × 30503.97 m²
1220 × 30503.72 m²
1300 × 28003.64 m²
1220 × 28003.42 m²
1220 × 24402.98 m²
Drawn to scale relative to each other.
Availability is documented per source. A combination that is not listed is undocumented rather than unavailable — request confirmation.
04
Technical centre
Performance data transcribed from the manufacturer's current Product Data Sheets. Every value carries the test method and, where the report states one, the grade and thickness it was measured on.
Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2
Resistance to immersion in boiling waternon-gloss finishes
EN 438-2:2016-02, p.12
≥ 4 grade
5 grade
Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2
Resistance to water vapournon-gloss finishes
EN 438-2:2016-02, p.14
≥ 4 grade
4 grade
Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2
Resistance to dry heat (160 °C)non-gloss finishes
EN 438-2:2016-02, p.16
≥ 4 grade
4 grade
Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2
Dimensional stability at elevated temperature — longitudinal
EN 438-2:2016-02, p.17
≤ 0.55 %
0.4 %
Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2
Dimensional stability at elevated temperature — transversal
EN 438-2:2016-02, p.17
≤ 1.05 %
0.7 %
Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2
Resistance to wet heat (100 °C)non-gloss finishes
EN 438-2:2016-02, p.18
≥ 4 grade
5 grade
Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2
Resistance to impact, small-diameter ball
EN 438-2:2016-02, p.20
≥ 20 N
> 33 N
Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2
Resistance to impact, large-diameter ballindentation diameter 9 mm
EN 438-2:2016-02, p.21
drop height ≥ 800 mm mm
> 1800 mm
Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2
Susceptibility to cracking
EN 438-2:2016-02, p.23
≥ 4 grade
5 grade< 2 mm
Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2
Resistance to scratching — smoothsmooth finishes
EN 438-2:2016-02, p.25
≥ 3 grade
3 grade
Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2
Resistance to scratching — texturedstructured surface
EN 438-2:2016-02, p.25
≥ 4 grade
4 grade
Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2
Resistance to staining — groups 1 & 2stain groups 1 & 2
EN 438-2:2016-02, p.26
= 5 grade
5 grade
Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2
Resistance to staining — group 3stain group 3
EN 438-2:2016-02, p.26
≥ 4 grade
4 grade
Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2
Light fastness — grey scale
EN 438-2:2016-02, p.27
4–5 grey scale
4–5 grey scale
Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2
Density
EN 323:1993
≥ 1.35 g/cm³
1.39 g/cm³
Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2
Technical data is based on manufacturer documentation and applicable test reports. Product specifications may vary by grade, thickness, décor, manufacturing batch or application. Please request the latest technical documentation before final specification or installation.
06
Dimensional tolerances
Nominal thickness (mm)
Thickness tolerance (mm)
Length & width (mm)
Straightness of edges (mm/m)
Squareness (mm/m)
Flatness (mm/m)
2–3
±0.2
+10 / −0
≤ 2
≤ 1.5
≤ 2
3–5
±0.3
+10 / −0
≤ 2
≤ 1.5
≤ 2
5–8
±0.4
+10 / −0
≤ 2
≤ 1.5
≤ 2
8–12
±0.5
+10 / −0
≤ 2
≤ 1.5
≤ 2
12–16
±0.6
+10 / −0
≤ 2
≤ 1.5
≤ 2
16–20
±0.7
+10 / −0
≤ 2
≤ 1.5
≤ 2
20–25
±0.8
+10 / −0
≤ 2
≤ 1.5
≤ 2
EN 438-2 · VIR TOPAZ (CGS / CGF) — Product Data Sheet
Evidence grouped by what it proves, with the scope each report actually covers. Certificates are held by the manufacturer and supplied on request.
Product standards
EN 438-3
Thin decorative laminate — classification
Grades: HGS / VGS
Environmental & sourcing
EN 15804+A2 · EPD-IES-0032917:001
Environmental Product Declaration — thin HPL
Environmental & sourcing
ISO 9001:2015 · ISO 14001:2015 · ISO 45001:2018
Integrated management systems
On request
Environmental & sourcing
FSC-STD-40-004 V3-1 · FSC-STD-50-001
FSC® Chain of Custody
On request
Environmental & sourcing
PEFC ST 2002:2020 · PEFC ST 2001:2020
PEFC™ Chain of Custody
On request
EU Deforestation Regulation
No EUDR documentation has been supplied for these products, and no compliance claim is made. FSC® and PEFC™ chain of custody certification is held, which is a different scope. Ask for the current position before relying on it in a tender.