RUSHIL DECOR

Technical centre

Performance data transcribed from the manufacturer's current Product Data Sheets. Every value carries the test method and, where the report states one, the grade and thickness it was measured on.

Technical data is based on manufacturer documentation and applicable test reports. Product specifications may vary by grade, thickness, décor, manufacturing batch or application. Please request the latest technical documentation before final specification or installation.

12

Two values in the source documents

The manufacturer's documents state more than one value for this. Both are shown with the document each came from. Nothing is published as fact until Rushil Decor confirms which applies.

  • C01

    KLADS grade designation

    • EDS / EDF
    • EGS 1 UV / EGS 2 UV / EGF 1 UV / EGF 2 UV
  • C02

    KLADS panel width

    • 1320 mm
    • 1300 mm
  • C04

    TOPAZ panel sizes

    • 1830×1830, 1830×2165, 1830×3660, 1830×4330
    • 1300×3050, 1300×4200, 1830×3660, 1830×4330
  • C05

    TOPAZ thickness range

    • 10 – 18 mm
    • 10 – 22 mm
  • C06

    VAULT thickness range

    • 10 – 18 mm
    • 10 – 19 mm
  • C07

    KLADS thickness range

    • 6 – 12 mm
    • 4 – 12 mm
  • C08

    ASTM E84 result

    • FSI 20 / SDI 80 — KLADS EDF, 6 mm
    • FSI 25 / SDI 150 — HPL, generic
  • C10

    Specific migration of formaldehyde

    • Not detected
    • 3 mg/kg against a 15 mg/kg limit
  • C12

    Materix 18X panel size

    • 1830 × 2150
    • 1830 × 2165
  • C13

    Impact resistance requirement

    • Drop height ≥ 1400 mm (EN 438-6)
    • Drop height > 1800 mm (EN 438-4)
  • C14

    Number of decors per product

    • 70+ / 250+ / 30+ designs
    • 107 TOPAZ / 117 VAULT / 265 KLADS codes printed
  • C15

    Specific migration of melamine

    • Not detected
    • 0.5 mg/kg against a 2.5 mg/kg limit