RUSHIL DECOR

Compact panel system for washrooms, partitions and lockers

VAULT

VAULT is a compact laminate specified for wet and high-traffic interiors: toilet cubicles, partitions and lockers. It is manufactured in compliance with EN 438-4 and EN 13501-1, in general-purpose (CGS) and fire-retardant (CGF) grades. Emission and antimicrobial testing supports use in healthcare, education and other regulated interiors.

Environment
Interior
Grades
CGS · CGF
Thickness
10, 12, 13, 15, 18 mm*
Formats
4

01

What it is built for

  • Mass increase 0.2 % after moisture exposure (EN 438-2.15)
  • > 99.99 % bacterial reduction across eight organisms including MRSA
  • Large-diameter ball impact above 1800 mm drop height
  • Formaldehyde 0.010 mg/m³ to EN 16516; full CDPH VOC panel reported

VAULT is supplied as a panel. Cubicle hardware is documented as a separate partnership and is not part of the panel specification — confirm the scope of supply for your market before specifying a complete system.

02

Grades and classification

GradeStandardEnvironment
CGSEN 438-4Interior
CGFEN 438-4InteriorFR

Compact General Purpose Standard

03

Formats

1830 × 4330
  • 1830 × 43307.92 m²
  • 1830 × 36606.70 m²
  • 1830 × 21653.96 m²
  • 1830 × 18303.35 m²
Drawn to scale relative to each other.

Currently published, pending confirmationC06

VAULT thickness range

10 – 18 mm — the most recent document we have states this (VIR VAULT (CGS / CGF) — Product Data Sheet, Jun 30, 2026). An earlier document gives a different figure; Rushil Decor has not yet confirmed which applies.

  • Other value on file: 10 – 19 mm — stated in Compact Verse by Rushil Decor — catalogue, p. 10

The manufacturer's documents state more than one value for this. Both are shown with the document each came from. Nothing is published as fact until Rushil Decor confirms which applies.

Request confirmation

Availability is documented per source. A combination that is not listed is undocumented rather than unavailable — request confirmation.

04

Technical centre

Performance data transcribed from the manufacturer's current Product Data Sheets. Every value carries the test method and, where the report states one, the grade and thickness it was measured on.

Grade

Technical data is based on manufacturer documentation and applicable test reports. Product specifications may vary by grade, thickness, décor, manufacturing batch or application. Please request the latest technical documentation before final specification or installation.

05

Fire

Fire classification is a property of a grade at a tested thickness, not of a product name. Every result below states the product, the grade, the standard and — where the report gives one — the thickness the panel was tested at.

Applies to grade CGF onlyOn request

EN 13501-1:2018 · EN 13823:2020+A1:2022 · EN ISO 11925-2

Classification

B-s1, d0

PropertyRequirementResult
FIGRA₀.₂MJ≤ 120 W/s26.1 W/s
FIGRA₀.₄MJ≤ 120 W/s18.3 W/s
Lateral flame spreadNo LFS to edgeNone
Total heat release, THR₆₀₀s≤ 7.5 MJ2.4 MJ
SMOGRA≤ 30 m²/s²1.5 m²/s²
Total smoke production, TSP₆₀₀s≤ 50 m²27.7 m²
Flaming droplets / particlesNone ≥ 10 s within first 600 sNone
IgnitabilityFlame must not reach 150 mm markNot reached

VIR VAULT (CGS / CGF) — Product Data Sheet · p. 2 · Full test report supplied on request

06

Dimensional tolerances

Nominal thickness (mm)Thickness tolerance (mm)Length & width (mm)Straightness of edges (mm/m)Squareness (mm/m)Flatness (mm/m)
2–3±0.2+10 / −0≤ 2≤ 1.5≤ 2
3–5±0.3+10 / −0≤ 2≤ 1.5≤ 2
5–8±0.4+10 / −0≤ 2≤ 1.5≤ 2
8–12±0.5+10 / −0≤ 2≤ 1.5≤ 2
12–16±0.6+10 / −0≤ 2≤ 1.5≤ 2
16–20±0.7+10 / −0≤ 2≤ 1.5≤ 2
20–25±0.8+10 / −0≤ 2≤ 1.5≤ 2

EN 438-2 · VIR TOPAZ (CGS / CGF) — Product Data Sheet

Surface finish — gloss levels

FinishGloss unitsMaximum deviation
High gloss> 70± 15
Semi-gloss30–70± 10
Suede10–30± 5
Matt< 10± 3

EN 13722

08

Certification

Evidence grouped by what it proves, with the scope each report actually covers. Certificates are held by the manufacturer and supplied on request.

  • Product standards

    EN 438-4

    Compact laminate — classification

    Grades: CGS / CGF

  • Fire

    EU 305/2011 (CPR)

    CE Certificate — Constancy of Performance

    Grades: CGF / EDFOn request

  • Fire

    EN 13501-1

    Reaction to fire — B-s1, d0

    Grades: CGF / EDF

  • Indoor environment

    EN 16516

    Formaldehyde emission

  • Indoor environment

    CDPH Standard Method v1.2

    VOC emissions

    Grades: CGS / CGF

  • Hygiene

    JIS Z 2801:2010

    Antibacterial activity

  • Hygiene

    ISO 21702:2019

    Antiviral activity

  • Hygiene

    ASTM G21-21

    Resistance to fungal growth

  • Environmental & sourcing

    EN 15804+A2 · EPD-IES-0032915:001

    Environmental Product Declaration — compact HPL

  • Environmental & sourcing

    ISO 9001:2015 · ISO 14001:2015 · ISO 45001:2018

    Integrated management systems

    On request

  • Environmental & sourcing

    FSC-STD-40-004 V3-1 · FSC-STD-50-001

    FSC® Chain of Custody

    On request

  • Environmental & sourcing

    PEFC ST 2002:2020 · PEFC ST 2001:2020

    PEFC™ Chain of Custody

    On request

EU Deforestation Regulation

No EUDR documentation has been supplied for these products, and no compliance claim is made. FSC® and PEFC™ chain of custody certification is held, which is a different scope. Ask for the current position before relying on it in a tender.

09

Downloads

  • Product data sheet

    VIR VAULT (CGS / CGF) — Product Data Sheet

    Grades, formats, EN 438-2 results, indoor air and antimicrobial data for VAULT.

    EN 438-4 · EN 438-2 · EN 13501-1 · EN 16516

    Download

    PDF · 353 KB · 5 pp · Direct download

    Manufacturer filename: Vault 2.0 TDS.pdf

  • Catalogue

    VAULT by Rushil Decor — catalogue

    Full VAULT collection catalogue including decors and panel specifications.

    On request →

    20 MB · 68 pp · On request

    Manufacturer filename: VAULT By Rushil Decor.pdf

  • Performance

    Performance & Durability Compliance

    Index of mechanical, dimensional and durability test reports.

    EN 438-2 · NEMA LD 3 · ISO 13894-1 · SEFA 3-2020

    Download

    PDF · 506 KB · 3 pp · Direct download

    Manufacturer filename: PERFORMANCE TEST - English.pdf

  • Fire

    Fire Performance

    Index of fire test reports across EN, BS, ASTM and UL standards.

    EN 13501 · EN 13823 · ISO 11925 · BS 476

    Download

    PDF · 419 KB · 3 pp · Direct download

    Manufacturer filename: FIRE PERFORMANCE - English.pdf