In short
- The new Construction Products Regulation (EU) 2024/3110 has applied since 8 January 2026, but for HPL wall and façade panels the Declaration of Performance and CE marking under EN 438-7 continue until a new harmonised specification arrives.
- Once products move under the new rules, the declaration must carry climate indicators: four from 2026, nine more from 2030 and the last six from 2032.
- Designers will ask for life-cycle data, because new buildings over 1 000 m² must report their life-cycle global warming potential from 2028; Rushil's EN 15804+A2 EPDs for thin and compact HPL already provide it.

How this review was put together
This article draws on the texts of Regulation (EU) 2024/3110 and of the recast Energy Performance of Buildings Directive (EU) 2024/1275; on the announcement of Poland's building supervision authority GUNB on the day the Regulation began to apply; on an analysis in the Italian building magazine Infobuild based on TÜV Italia; and on the Italian technical publisher BibLus on HPL and CE marking. Each point is attributed, and the sources are listed at the end.
In force — but not yet for every product
Regulation (EU) 2024/3110 has applied since 8 January 2026, with some provisions in force from January 2025 and the article on national penalties from 8 January 2027. It replaces Regulation (EU) No 305/2011, except for a group of articles — those on the Declaration of Performance and CE marking among them — that stay in force until 8 January 2040.
GUNB spelled out what that means in practice. A manufacturer must draw up the new declaration of performance and conformity only when the product is covered by a harmonised technical specification adopted under the new Regulation; otherwise it may do so voluntarily, through a European technical assessment. Harmonised standards in force on 8 January 2026 remain valid under the old Regulation until the Commission withdraws them, and until then manufacturers keep issuing Declarations of Performance in the familiar format and affixing CE marking under the old rules.
The switch happens family by family: the new obligations apply one year after the Commission adopts the act that makes a new harmonised standard mandatory for that family, and within a further year the old standard references are withdrawn.
Where HPL panels stand today
BibLus is explicit that HPL panels permanently incorporated in a building — façade cladding among them — need CE marking backed by a Declaration of Performance, and that EN 438-7 is the part of the HPL standard that links wall and ceiling finishes to CE marking. Until a harmonised specification under the new Regulation covers that product family, the document to ask for remains the Declaration of Performance to EN 438-7.
Work already done is not lost: certificates, test reports and European technical assessments issued under the old Regulation may serve as the technical basis for compliance with the new one, where the product type corresponds and the requirements and methods are still valid.
What the new declaration adds
The declaration of performance and conformity must include the product's environmental performance over its life cycle, packaging included, calculated with free software published by the Commission. At a minimum it covers the four climate-change indicators of Annex II — total, fossil, biogenic, and land use and land-use change — from 8 January 2026; nine more indicators, from ozone depletion to water use, from 9 January 2030; and the last six, from particulate matter to land-use impacts, from 9 January 2032. As GUNB's reading makes clear, these dates bite only for products already under the new specifications.
The Regulation also gives a manufacturer the right to request from its suppliers the data and calculations it needs for these figures — so a façade system maker will ask the panel producer for them.
Digital passport, identification and labelling
Within 18 months of the delegated act on the construction digital product passport system, manufacturers must make a digital product passport available, connected to a data carrier on the product. Each product must carry a unique identification code of its product type and, where available, a batch or serial number.
Products that need expertise to use must be labelled "Only for professional use"; anything not so labelled is treated as intended also for non-professional users and consumers. The declaration and the product information must still be provided on paper, free of charge, if the end-user asks at the time of purchase.
Why designers will ask for the data
The buildings directive creates the demand. Under the recast EPBD, the life-cycle global warming potential of new buildings must be calculated and shown on the energy performance certificate from 1 January 2028 for buildings over 1 000 m² and from 1 January 2030 for all new buildings; by 1 January 2027 member states must publish roadmaps towards limit values.
Infobuild, drawing on TÜV Italia, describes the two texts as complementary: the directive says what to measure at building level, the Regulation how manufacturers supply the data. Environmental Product Declarations, until now mostly voluntary or used for LEED and BREEAM credits, become tools of compliance, and TÜV Italia expects more requests to verify EPDs, life-cycle assessments and the quality of the data behind them.
Reading this against the Rushil range
This site publishes Rushil's fire classifications and EN 438 test data for compact and exterior panels, but not yet a Declaration of Performance for compact panels used as wall or façade cladding; ask for it with the quotation.
Rushil's Environmental Product Declarations to EN 15804+A2 for thin and compact HPL already provide the life-cycle data that building assessments under the EPBD draw on. Under the new Regulation, the climate figures in a declaration of performance and conformity are calculated with the Commission's software, so an EPD is a source of data rather than a substitute for that declaration.
Common questions
Do HPL façade panels need the new declaration of performance and conformity already?
Only once a harmonised technical specification under the new Regulation covers them, plus the transition period. Until then the Declaration of Performance and CE marking continue under the harmonised standard — for HPL wall and ceiling finishes, EN 438-7.
When does the CPR require climate data?
The declaration of performance and conformity must cover the four climate-change indicators from 8 January 2026, more indicators from 2030 and the rest from 2032 — but only for products already under the new harmonised specifications.
Is an EPD the same as the new environmental declaration?
No. The Regulation requires the declared environmental values to be calculated with the Commission's software. An EPD to EN 15804 is a separate document, used in building life-cycle assessments and as a source of data.
Sources
- EUR-Lex — Official Journal of the European Union — Regulation (EU) 2024/3110 laying down harmonised rules for the marketing of construction products and repealing Regulation (EU) No 305/2011Nov 27, 2024 · en
- Główny Urząd Nadzoru Budowlanego (GUNB) — Zmiana przepisów dotyczących zharmonizowanych zasad wprowadzania do obrotu wyrobów budowlanychJan 8, 2026 · pl
- Infobuild, Raffaella Capritti — Sostenibilità nei capitolati, come EPBD, CPR e Tassonomia UE cambiano la filiera delle costruzioniSep 22, 2026 · it
- EUR-Lex — Official Journal of the European Union — Directive (EU) 2024/1275 on the energy performance of buildings (recast)Apr 24, 2024 · en
- BibLus (ACCA software) — Applicazioni del laminato HPL nel settore edileit
Compiled for this site from the publications listed above. Summaries are in our own words, not quotations — read the originals for the full argument.


