Exterior compact laminate for architectural cladding
KLADS
KLADS is an exterior-grade compact laminate for cladding. Décor papers with lightfastness above 5 sit under a UV protection film thicker than 50 µm, available on one or both faces depending on how much of the panel is exposed. It is classified to EN 438-6 and supplied in standard and fire-retardant grades over a brown or black phenolic core.
Brown core standard; black core available on demand
Décor paper lightfastness above 5
02
Grades and classification
Grade
Standard
Environment
EDS
EN 438-6
Exterior
EDF
EN 438-6
Exterior
FR
EGS 1 UV
—
Exterior
1 UV
EGS 2 UV
—
Exterior
2 UV
EGF 1 UV
—
Exterior
FR1 UV
EGF 2 UV
—
Exterior
FR2 UV
Exterior Grade Standard
Two values in the source documentsC01
KLADS grade designation
EDS / EDF — stated in VIR KLADS (EDS / EDF) — Product Data Sheet, p. 1
EGS 1 UV / EGS 2 UV / EGF 1 UV / EGF 2 UV — stated in VIR KLADS (EDS / EDF) — Product Data Sheet, p. 4
The manufacturer's documents state more than one value for this. Both are shown with the document each came from. Nothing is published as fact until Rushil Decor confirms which applies.
1320 mm — the most recent document we have states this (VIR KLADS (EDS / EDF) — Product Data Sheet, Jun 30, 2026). An earlier document gives a different figure; Rushil Decor has not yet confirmed which applies.
Other value on file: 1300 mm — stated in KLADS by Rushil Decor — catalogue
The manufacturer's documents state more than one value for this. Both are shown with the document each came from. Nothing is published as fact until Rushil Decor confirms which applies.
6 – 12 mm — the most recent document we have states this (VIR KLADS (EDS / EDF) — Product Data Sheet, Jun 30, 2026). An earlier document gives a different figure; Rushil Decor has not yet confirmed which applies.
Other value on file: 4 – 12 mm — stated in Compact Verse by Rushil Decor — catalogue, p. 14
The manufacturer's documents state more than one value for this. Both are shown with the document each came from. Nothing is published as fact until Rushil Decor confirms which applies.
Availability is documented per source. A combination that is not listed is undocumented rather than unavailable — request confirmation.
04
Technical centre
Performance data transcribed from the manufacturer's current Product Data Sheets. Every value carries the test method and, where the report states one, the grade and thickness it was measured on.
Bending strength — long sideparallel to long side of panel
EN ISO 178
≥ 80 MPa
136.1 MPa6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Bending strength — short sideparallel to short side of panel
EN ISO 178
≥ 80 MPa
98.8 MPa6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Modulus of elasticity — long sideparallel to long side of panel
EN ISO 178
≥ 9 000 MPa
15 336 MPa6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Modulus of elasticity — short sideparallel to short side of panel
EN ISO 178
≥ 9 000 MPa
11 088 MPa6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Tensile strength
EN ISO 527-2
≥ 60 MPa
120 MPa6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Resistance to impact, large-diameter ballimpact outcome < 10 mm
EN 438-2:2016, section 21
drop height ≥ 1400 mm mm
1800 mm6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Resistance to fixing — screw pullout
ISO 13894-1
—
3 514 N6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Thermal conductivity
EN 12524
≤ 0.30 W/mK
0.2 W/mK6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Coefficient of linear thermal expansion
ISO 11359-2
—
6.81 × 10⁻⁶ mm/mm °C6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Resistance to climate shock — appearance
EN 438-2:2016, section 19
≥ 4 grade
5 grade6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Climate shock — flexural strength ratio
EN 438-2:2016, section 19
≥ 0.95 Δs
0.98 Δs6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Climate shock — flexural modulus ratio
EN 438-2:2016, section 19
≥ 0.95 Δm
0.95 Δm6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Light fastness — grey scale
EN 438-2:2016, section 27
4–5 grey scale
5 grey scale6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Resistance to staining — groups 1 & 2stain groups 1 & 2
EN 438-2:2016, section 26
= 5 grade
5 grade6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Resistance to staining — group 3stain group 3
EN 438-2:2016, section 26
≥ 4 grade
5 grade6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Resistance to crazing
EN 438-2:2016, section 24
≥ 4 grade
5 grade6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Dimensional stability at elevated temperature — longitudinal
EN 438-2:2016, section 17
≤ 0.30 %
0.10 %6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Dimensional stability at elevated temperature — transversal
EN 438-2:2016, section 17
≤ 0.60 %
0.08 %6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Resistance to dry heat (160 °C)
EN 438-2:2016, section 16
≥ 4 grade
5 grade6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Resistance to wet heat (100 °C)
EN 438-2:2016, section 18
≥ 4 grade
5 grade6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Immersion in boiling water — mass increase
EN 438-2:2016, section 12
≤ 2.0 %
0.4 %6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Immersion in boiling water — thickness increase
EN 438-2:2016, section 12
≤ 2.0 %
0.2 %6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Water vapour — mass increase
EN 438-2:2016, section 14
≤ 5.0 %
1.0 %6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Resistance to surface wear
EN 438-2:2016, section 10
≥ 150 revolutions
450 revolutions6 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3
Technical data is based on manufacturer documentation and applicable test reports. Product specifications may vary by grade, thickness, décor, manufacturing batch or application. Please request the latest technical documentation before final specification or installation.
05
Fire
Fire classification is a property of a grade at a tested thickness, not of a product name. Every result below states the product, the grade, the standard and — where the report gives one — the thickness the panel was tested at.
Applies to grade EDF onlyTested on 6 mmOn request
EN 13501-1:2018 · EN 13823:2020+A1:2022 · EN ISO 11925-2
Classification
B-s1, d0
Property
Requirement
Result
FIGRA₀.₂MJ
≤ 120 W/s
16.15 W/s
Lateral flame spread
No LFS to edge
None
Total heat release, THR₆₀₀s
≤ 7.5 MJ
4.42 MJ
SMOGRA
≤ 30 m²/s²
0 m²/s²
Total smoke production, TSP₆₀₀s
≤ 50 m²
29.11 m²
Flaming droplets / particles
None ≥ 10 s within first 600 s
None
Ignitability
Flame must not reach 150 mm mark
Not reached
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 2 · Full test report supplied on request
Applies to grade EDF onlyTested on 6 mmOn request
ASTM E84-23
Classification
Class A / Class I
Property
Requirement
Result
Flame spread index
0–25
20
Smoke developed index
0–450
80
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 2 · Full test report supplied on request
Applies to grade EDF onlyTested on 6 mmOn request
BS 476 Part 7:1997
Classification
Class 1
Property
Requirement
Result
Flame spread at 1½ minutes
≤ 165 mm
0 mm
Final flame spread
≤ 165 mm
0 mm
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 2 · Full test report supplied on request
Applies to grade EDF onlyTested on 6 mmOn request
BS 476 Part 6:1989+A1:2009
Classification
Reported
Property
Requirement
Result
Fire propagation index
Tested value
11.6
Sub-index i₁
Reported
2.3
Sub-index i₂
Reported
3.5
Sub-index i₃
Reported
5.8
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 2 · Full test report supplied on request
Applies to grade EDF onlyTested on 6 mmOn request
UL 94:1997 (20 mm)
Classification
V-0
Property
Requirement
Result
After-flame time t₁
< 10 s
0 s
After-flame time t₂
< 10 s
0 s
Total after-flame time
< 50 s
0 s
After-glow time t₃
< 30 s
0 s
VIR KLADS (EDS / EDF) — Product Data Sheet · p. 2 · Full test report supplied on request
Reaction-to-fire classification applies to the panel as tested. It does not certify a complete façade construction, which is assessed as a system including substructure, cavity and fixings.
Two values in the source documentsC08
ASTM E84 result
FSI 20 / SDI 80 — KLADS EDF, 6 mm — stated in VIR KLADS (EDS / EDF) — Product Data Sheet, p. 2
FSI 25 / SDI 150 — HPL, generic — stated in Fire Performance, p. 2
The manufacturer's documents state more than one value for this. Both are shown with the document each came from. Nothing is published as fact until Rushil Decor confirms which applies.
Evidence grouped by what it proves, with the scope each report actually covers. Certificates are held by the manufacturer and supplied on request.
Product standards
EN 438-6
Exterior compact laminate — classification
Grades: EDS / EDF
Fire
EU 305/2011 (CPR)
CE Certificate — Constancy of Performance
Grades: CGF / EDFOn request
Fire
EN 13501-1
Reaction to fire — B-s1, d0
Grades: CGF / EDF
Fire
ASTM E84
Flame spread and smoke developed index
Grades: EDF
Fire
BS 476 Part 6 & 7
Fire propagation index and surface spread of flame
Grades: EDF
Fire
UL 94
Vertical burning — V-0
Grades: EDF
Environmental & sourcing
EN 15804+A2 · EPD-IES-0032915:001
Environmental Product Declaration — compact HPL
Environmental & sourcing
ISO 9001:2015 · ISO 14001:2015 · ISO 45001:2018
Integrated management systems
On request
Environmental & sourcing
FSC-STD-40-004 V3-1 · FSC-STD-50-001
FSC® Chain of Custody
On request
Environmental & sourcing
PEFC ST 2002:2020 · PEFC ST 2001:2020
PEFC™ Chain of Custody
On request
EU Deforestation Regulation
No EUDR documentation has been supplied for these products, and no compliance claim is made. FSC® and PEFC™ chain of custody certification is held, which is a different scope. Ask for the current position before relying on it in a tender.