Performance
Performance data transcribed from the manufacturer's current Product Data Sheets. Every value carries the test method and, where the report states one, the grade and thickness it was measured on.
01
Decorative HPL
Grade
| Property | Test method | Requirement | Result | Source |
|---|---|---|---|---|
| Resistance to surface wear | EN 438-2:2016-02, p.10 | > 150 revolutions | > 400 revolutions | Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2 |
| Resistance to immersion in boiling waternon-gloss finishes | EN 438-2:2016-02, p.12 | ≥ 4 grade | 5 grade | Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2 |
| Resistance to water vapournon-gloss finishes | EN 438-2:2016-02, p.14 | ≥ 4 grade | 4 grade | Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2 |
| Resistance to dry heat (160 °C)non-gloss finishes | EN 438-2:2016-02, p.16 | ≥ 4 grade | 4 grade | Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2 |
| Dimensional stability at elevated temperature — longitudinal | EN 438-2:2016-02, p.17 | ≤ 0.55 % | 0.4 % | Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2 |
| Dimensional stability at elevated temperature — transversal | EN 438-2:2016-02, p.17 | ≤ 1.05 % | 0.7 % | Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2 |
| Resistance to wet heat (100 °C)non-gloss finishes | EN 438-2:2016-02, p.18 | ≥ 4 grade | 5 grade | Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2 |
| Resistance to impact, small-diameter ball | EN 438-2:2016-02, p.20 | ≥ 20 N | > 33 N | Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2 |
| Resistance to impact, large-diameter ballindentation diameter 9 mm | EN 438-2:2016-02, p.21 | drop height ≥ 800 mm mm | > 1800 mm | Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2 |
| Susceptibility to cracking | EN 438-2:2016-02, p.23 | ≥ 4 grade | 5 grade< 2 mm | Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2 |
| Resistance to scratching — smoothsmooth finishes | EN 438-2:2016-02, p.25 | ≥ 3 grade | 3 grade | Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2 |
| Resistance to scratching — texturedstructured surface | EN 438-2:2016-02, p.25 | ≥ 4 grade | 4 grade | Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2 |
| Resistance to staining — groups 1 & 2stain groups 1 & 2 | EN 438-2:2016-02, p.26 | = 5 grade | 5 grade | Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2 |
| Resistance to staining — group 3stain group 3 | EN 438-2:2016-02, p.26 | ≥ 4 grade | 4 grade | Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2 |
| Light fastness — grey scale | EN 438-2:2016-02, p.27 | 4–5 grey scale | 4–5 grey scale | Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2 |
| Density | EN 323:1993 | ≥ 1.35 g/cm³ | 1.39 g/cm³ | Decorative HPL (HGS / VGS) — Product Data Sheet · p. 2 |
02
Compact HPL
Grade
| Property | Test method | Requirement | Result | Source |
|---|---|---|---|---|
| Surface quality — stains, dirt and similar defects | EN 438-2.4 | ≤ 2 mm²/m² | 1 mm²/m² | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Surface quality — fibres, hairs and stripes | EN 438-2.4 | ≤ 20 mm²/m² | 10 mm²/m² | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to surface wear | EN 438-2.10 | ≥ 150 revolutions | 450 revolutions | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Immersion in boiling water — mass increase | EN 438-2.12 | ≤ 2 % | 0.4 %≥ 5 mm | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Immersion in boiling water — thickness increase | EN 438-2.12 | ≤ 2 % | 0.2 %≥ 5 mm | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to water vapournon-gloss finishes | EN 438-2.14 | ≥ 4 grade | 5 grade | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to moisture | EN 438-2.15 | ≤ 2 % | 0.2 %≥ 5 mm | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to dry heat (160 °C)non-gloss finishes | EN 438-2.16 | ≥ 4 grade | 5 grade | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Dimensional stability at elevated temperature — longitudinal | EN 438-2.17 | ≤ 0.3 % | 0.1 %≥ 5 mm | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Dimensional stability at elevated temperature — transversal | EN 438-2.17 | ≤ 0.6 % | 0.08 %≥ 5 mm | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to impact, large-diameter ballindentation diameter 10 mm | EN 438-2.21 | drop height > 1800 mm mm | > 1800 mm≥ 6 mm | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to crazing | EN 438-2.24 | ≥ 4 grade | 5 grade | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to scratching — smoothsmooth finishes | EN 438-2.25 | ≥ 2 grade | 5 grade | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to scratching — texturedtextured finishes | EN 438-2.25 | ≥ 3 grade | 5 grade | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to staining — groups 1 & 2stain groups 1 & 2 | EN 438-2.26 | = 5 grade | 5 grade | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to staining — group 3stain group 3 | EN 438-2.26 | ≥ 4 grade | 5 grade | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Light fastness — grey scale | EN 438-2.27 | 4–5 grey scale | 5 grey scale | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Light fastness — wool scale | ASTM G53-91 (314–400 nm) | ≥ 4 wool scale | 6 wool scale | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Modulus of elasticity | EN ISO 178 | ≥ 9 000 MPa | 15 336 MPa | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Flexural strength | EN ISO 178 | ≥ 80 MPa | 136.1 MPa | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Density | EN ISO 1183 | ≥ 1.35 g/cm³ | 1.47 g/cm³ | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to fixing — screw pullout | ISO 13894-1 | — | 3 514 N | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Thermal conductivity | EN 12524 | ≤ 0.30 W/mK | 0.2 W/mK | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Antibacterial activity | JIS Z 2801:2010 | R > 2 % | > 99.99 % | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Antiviral activity | ISO 21702:2019 | — | > 99.99 % | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Antifungal resistance | ASTM G21-21 | ≤ 1 rating | 0 rating | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Formaldehyde emission | EN 16516 | ≤ 0.124 mg/m³ | 0.01 mg/m³ | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Formaldehyde emission class | EN 717-2 | — | E1 class | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
03
TOPAZ
Grade
| Property | Test method | Requirement | Result | Source |
|---|---|---|---|---|
| Surface quality — stains, dirt and similar defects | EN 438-2.4 | ≤ 2 mm²/m² | 1 mm²/m² | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Surface quality — fibres, hairs and stripes | EN 438-2.4 | ≤ 20 mm²/m² | 10 mm²/m² | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to surface wear | EN 438-2.10 | ≥ 150 revolutions | 450 revolutions | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Immersion in boiling water — mass increase | EN 438-2.12 | ≤ 2 % | 0.4 %≥ 5 mm | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Immersion in boiling water — thickness increase | EN 438-2.12 | ≤ 2 % | 0.2 %≥ 5 mm | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to water vapournon-gloss finishes | EN 438-2.14 | ≥ 4 grade | 5 grade | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to moisture | EN 438-2.15 | ≤ 2 % | 0.2 %≥ 5 mm | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to dry heat (160 °C)non-gloss finishes | EN 438-2.16 | ≥ 4 grade | 5 grade | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Dimensional stability at elevated temperature — longitudinal | EN 438-2.17 | ≤ 0.3 % | 0.1 %≥ 5 mm | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Dimensional stability at elevated temperature — transversal | EN 438-2.17 | ≤ 0.6 % | 0.08 %≥ 5 mm | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to impact, large-diameter ballindentation diameter 10 mm | EN 438-2.21 | drop height > 1800 mm mm | > 1800 mm≥ 6 mm | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to crazing | EN 438-2.24 | ≥ 4 grade | 5 grade | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to scratching — smoothsmooth finishes | EN 438-2.25 | ≥ 2 grade | 5 grade | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to scratching — texturedtextured finishes | EN 438-2.25 | ≥ 3 grade | 5 grade | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to staining — groups 1 & 2stain groups 1 & 2 | EN 438-2.26 | = 5 grade | 5 grade | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to staining — group 3stain group 3 | EN 438-2.26 | ≥ 4 grade | 5 grade | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Light fastness — grey scale | EN 438-2.27 | 4–5 grey scale | 5 grey scale | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Light fastness — wool scale | ASTM G53-91 (314–400 nm) | ≥ 4 wool scale | 6 wool scale | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Modulus of elasticity | EN ISO 178 | ≥ 9 000 MPa | 15 336 MPa | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Flexural strength | EN ISO 178 | ≥ 80 MPa | 136.1 MPa | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Density | EN ISO 1183 | ≥ 1.35 g/cm³ | 1.47 g/cm³ | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to fixing — screw pullout | ISO 13894-1 | — | 3 514 N | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Thermal conductivity | EN 12524 | ≤ 0.30 W/mK | 0.2 W/mK | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Antibacterial activity | JIS Z 2801:2010 | R > 2 % | > 99.99 % | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Antiviral activity | ISO 21702:2019 | — | > 99.99 % | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Antifungal resistance | ASTM G21-21 | ≤ 1 rating | 0 rating | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Formaldehyde emission | EN 16516 | ≤ 0.124 mg/m³ | 0.01 mg/m³ | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
| Formaldehyde emission class | EN 717-2 | — | E1 class | VIR TOPAZ (CGS / CGF) — Product Data Sheet · p. 5 |
04
VAULT
Grade
| Property | Test method | Requirement | Result | Source |
|---|---|---|---|---|
| Surface quality — stains, dirt and similar defects | EN 438-2.4 | ≤ 2 mm²/m² | 1 mm²/m² | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Surface quality — fibres, hairs and stripes | EN 438-2.4 | ≤ 20 mm²/m² | 10 mm²/m² | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to surface wear | EN 438-2.10 | ≥ 150 revolutions | 450 revolutions | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Immersion in boiling water — mass increase | EN 438-2.12 | ≤ 2 % | 0.4 %≥ 5 mm | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Immersion in boiling water — thickness increase | EN 438-2.12 | ≤ 2 % | 0.2 %≥ 5 mm | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to water vapournon-gloss finishes | EN 438-2.14 | ≥ 4 grade | 5 grade | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to moisture | EN 438-2.15 | ≤ 2 % | 0.2 %≥ 5 mm | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to dry heat (160 °C)non-gloss finishes | EN 438-2.16 | ≥ 4 grade | 5 grade | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Dimensional stability at elevated temperature — longitudinal | EN 438-2.17 | ≤ 0.3 % | 0.1 %≥ 5 mm | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Dimensional stability at elevated temperature — transversal | EN 438-2.17 | ≤ 0.6 % | 0.08 %≥ 5 mm | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to impact, large-diameter ballindentation diameter 10 mm | EN 438-2.21 | drop height > 1800 mm mm | > 1800 mm≥ 6 mm | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to crazing | EN 438-2.24 | ≥ 4 grade | 5 grade | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to scratching — smoothsmooth finishes | EN 438-2.25 | ≥ 2 grade | 5 grade | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to scratching — texturedtextured finishes | EN 438-2.25 | ≥ 3 grade | 5 grade | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to staining — groups 1 & 2stain groups 1 & 2 | EN 438-2.26 | = 5 grade | 5 grade | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to staining — group 3stain group 3 | EN 438-2.26 | ≥ 4 grade | 5 grade | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Light fastness — grey scale | EN 438-2.27 | 4–5 grey scale | 5 grey scale | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Light fastness — wool scale | ASTM G53-91 (314–400 nm) | ≥ 4 wool scale | 6 wool scale | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Modulus of elasticity | EN ISO 178 | ≥ 9 000 MPa | 15 336 MPa | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Flexural strength | EN ISO 178 | ≥ 80 MPa | 136.1 MPa | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Density | EN ISO 1183 | ≥ 1.35 g/cm³ | 1.47 g/cm³ | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Resistance to fixing — screw pullout | ISO 13894-1 | — | 3 514 N | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Thermal conductivity | EN 12524 | ≤ 0.30 W/mK | 0.2 W/mK | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Antibacterial activity | JIS Z 2801:2010 | R > 2 % | > 99.99 % | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Antiviral activity | ISO 21702:2019 | — | > 99.99 % | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Antifungal resistance | ASTM G21-21 | ≤ 1 rating | 0 rating | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Formaldehyde emission | EN 16516 | ≤ 0.124 mg/m³ | 0.01 mg/m³ | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
| Formaldehyde emission class | EN 717-2 | — | E1 class | VIR VAULT (CGS / CGF) — Product Data Sheet · p. 5 |
05
KLADS
Grade
| Property | Test method | Requirement | Result | Source |
|---|---|---|---|---|
| Artificial weathering, 3 000 h — contrast | EN 438-2:2016, section 29 | ≥ 3 grey scale | 4–5 grey scale6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Artificial weathering, 3 000 h — appearance | EN 438-2:2016, section 29 | ≥ 4 grade | 5 grade6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| UV resistance, 1 500 h — contrast | EN 438-2:2016, section 28 | ≥ 3 grey scale | 4–5 grey scale6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| UV resistance, 1 500 h — appearance | EN 438-2:2016, section 28 | ≥ 4 grade | 5 grade6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Density | EN 323 | ≥ 1.35 g/cm³ | 1.47 g/cm³6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Bending strength — long sideparallel to long side of panel | EN ISO 178 | ≥ 80 MPa | 136.1 MPa6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Bending strength — short sideparallel to short side of panel | EN ISO 178 | ≥ 80 MPa | 98.8 MPa6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Modulus of elasticity — long sideparallel to long side of panel | EN ISO 178 | ≥ 9 000 MPa | 15 336 MPa6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Modulus of elasticity — short sideparallel to short side of panel | EN ISO 178 | ≥ 9 000 MPa | 11 088 MPa6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Tensile strength | EN ISO 527-2 | ≥ 60 MPa | 120 MPa6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Resistance to impact, large-diameter ballimpact outcome < 10 mm | EN 438-2:2016, section 21 | drop height ≥ 1400 mm mm | 1800 mm6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Resistance to fixing — screw pullout | ISO 13894-1 | — | 3 514 N6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Thermal conductivity | EN 12524 | ≤ 0.30 W/mK | 0.2 W/mK6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Coefficient of linear thermal expansion | ISO 11359-2 | — | 6.81 × 10⁻⁶ mm/mm °C6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Resistance to climate shock — appearance | EN 438-2:2016, section 19 | ≥ 4 grade | 5 grade6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Climate shock — flexural strength ratio | EN 438-2:2016, section 19 | ≥ 0.95 Δs | 0.98 Δs6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Climate shock — flexural modulus ratio | EN 438-2:2016, section 19 | ≥ 0.95 Δm | 0.95 Δm6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Light fastness — grey scale | EN 438-2:2016, section 27 | 4–5 grey scale | 5 grey scale6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Resistance to staining — groups 1 & 2stain groups 1 & 2 | EN 438-2:2016, section 26 | = 5 grade | 5 grade6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Resistance to staining — group 3stain group 3 | EN 438-2:2016, section 26 | ≥ 4 grade | 5 grade6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Resistance to crazing | EN 438-2:2016, section 24 | ≥ 4 grade | 5 grade6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Dimensional stability at elevated temperature — longitudinal | EN 438-2:2016, section 17 | ≤ 0.30 % | 0.10 %6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Dimensional stability at elevated temperature — transversal | EN 438-2:2016, section 17 | ≤ 0.60 % | 0.08 %6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Resistance to dry heat (160 °C) | EN 438-2:2016, section 16 | ≥ 4 grade | 5 grade6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Resistance to wet heat (100 °C) | EN 438-2:2016, section 18 | ≥ 4 grade | 5 grade6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Immersion in boiling water — mass increase | EN 438-2:2016, section 12 | ≤ 2.0 % | 0.4 %6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Immersion in boiling water — thickness increase | EN 438-2:2016, section 12 | ≤ 2.0 % | 0.2 %6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Water vapour — mass increase | EN 438-2:2016, section 14 | ≤ 5.0 % | 1.0 %6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
| Resistance to surface wear | EN 438-2:2016, section 10 | ≥ 150 revolutions | 450 revolutions6 mm | VIR KLADS (EDS / EDF) — Product Data Sheet · p. 3 |
Two values in the source documentsC13
Impact resistance requirement
- Drop height ≥ 1400 mm (EN 438-6) — stated in VIR KLADS (EDS / EDF) — Product Data Sheet, p. 3
- Drop height > 1800 mm (EN 438-4) — stated in VIR TOPAZ (CGS / CGF) — Product Data Sheet, p. 5
The manufacturer's documents state more than one value for this. Both are shown with the document each came from. Nothing is published as fact until Rushil Decor confirms which applies.
Request confirmationTechnical data is based on manufacturer documentation and applicable test reports. Product specifications may vary by grade, thickness, décor, manufacturing batch or application. Please request the latest technical documentation before final specification or installation.

